30MS Lirinel (Color A): Customization Ideas
By Newtype: Gundam Model Kits / Gunpla / Paint / Tools | Published: 2026-10-30
Category: How-to Guides
Explore creative ways to customize the 30MS SIS-T00 06 Lirinel (Color A) kit with these practical build ideas and step-by-step tips.
Quick Answer
Start by snap-building Lirinel to understand her joints, then add panel lining, swap armor parts, and pose her dynamically to make your 30MS Lirinel (Color A) stand out.
Why Start with a Snap Build?
Before you customize, assemble Lirinel without glue or paint. This lets you test the joints and see how the parts fit, so you can plan your mods without damaging the plastic.
Snap-building also reveals which parts are easiest to remove later, making it simpler to swap armor or apply paint.
Customizing Without Paint
Lirinel's parts are molded in color, so you can skip painting entirely. Use panel liners and decals to add detail without covering the original color scheme.
If you do want to paint, consider masking the bunny-themed armor parts to keep the base color intact while adding accent colors.
Step-by-Step Customization Process
- Step 1: Snap Build and Test Pose: Assemble Lirinel without glue or paint. Move all joints to check their range and identify any loose parts. Common mistake: forcing a joint can break a peg, so use gentle pressure and sand if needed. Mark any loose joints with a small piece of tape for later tightening.
- Step 2: Panel Line for Detail: Use a fine-tip panel liner pen to trace the lines on the armor and body. Wipe away excess with a cotton swab. Common mistake: applying too much ink can seep into joints and stain them, so work in small sections. Let the liner dry completely before posing the kit.
- Step 3: Customize the Bunny Armor: Swap the bunny-themed armor parts with other 30MS option parts (if available) or paint them to match your color scheme. Common mistake: painting over the peg holes can make parts hard to attach, so mask them before painting. Test the fit of any swapped parts before painting.
- Step 4: Add Decals or Stickers: Apply the included stickers or use water-slide decals to add markings. Common mistake: placing a decal on a curved surface can cause wrinkles; use a decal softener to help it conform. Seal decals with a clear topcoat if you plan to handle the kit often.
- Step 5: Final Pose and Display: Pose Lirinel dynamically using her high articulation, and display her on a stand or diorama. Common mistake: leaving her in a static pose hides her posability, so experiment with action poses. Use a clear stand to show off her small size and bunny armor.
Product Facts
- 30MS SIS-T00 06 Lirinel (Color A): The kit includes three different face parts and bunny-themed armor, and is approximately 125mm tall, the smallest in the 30MS series. The three faces let you change expressions easily, while the small size and armor parts are ideal for quick customization projects.
30MS SIS-T00 06 Lirinel (Color A)
