What These Decals Add to Your MGSD Freedom Gundam
The G-Rework MGSD Freedom Gundam Decals are waterslide decals designed to add fine detail and a crisp, professional finish to your kit. They include a variety of markings and insignias to increase realism and visual interest. These decals are specifically tailored for the MGSD Freedom Gundam, ensuring a proper fit for the kit's surfaces.
Product Facts for Your Bench
- G-Rework MGSD Freedom Gundam Decals: High-quality waterslide decals from G-Rework, known for precise printing and reliable application. You can trust the print quality and adhesion when applied correctly, reducing the risk of silvering or tearing.

G-Rework MGSD Freedom Gundam Decals - G-Rework MGSD Freedom Gundam Decals: Specifically tailored for the MGSD Freedom Gundam, ensuring a proper fit for the kit’s surfaces. No trimming or guesswork needed—the decals match the panel lines and contours of this specific model.
Step-by-Step Application Guide
These decals are compatible with standard model-building techniques. Apply with water and a setting solution for best results. Work in a clean, well-lit area with good ventilation.
- Prepare the surface: Ensure the plastic is clean and free of dust or oils. A gloss topcoat before decaling helps the decal slide into position and reduces silvering.
- Cut and soak: Cut out each decal close to the printed edge. Dip in room-temperature water until the decal loosens from the backing paper, following the supplied product instructions.
- Slide into position: Use tweezers to slide the decal onto the desired spot. A damp cotton swab or brush can help nudge it into exact alignment.
- Set and seal: Gently press out any trapped water or air bubbles with a cotton swab. Apply a decal setting solution to soften the decal and help it conform to surface details. Allow to dry fully before handling.
- Protect the finish: Once dry, seal the decals with a clear topcoat (matte, semi-gloss, or gloss) to protect them from wear and to blend the edges into the surrounding paint.
Tips for Clean Results
Work slowly and use fresh water for each decal to avoid contamination. If a decal tears, you can sometimes salvage it by applying a drop of setting solution to soften the adhesive and repositioning carefully. Always let each decal dry completely before moving on to the next to avoid smudging or shifting.

