HGUC 087 MS-06FZ Zaku II FZ: Painting and Detailing Guide

Quick Answer

To get a crisp finish on the HGUC 087 MS-06FZ Zaku II FZ, start with a thorough clean-up, apply a primer, then layer your paint, panel line, and weather. This guide walks you through each step with common mistakes to avoid.

Step-by-Step Painting and Detailing Process

1. Clean and Prep the Parts: Cut all parts from the runners, remove nub marks with a hobby knife or sanding stick, and wash the parts in warm soapy water to remove mold release agents. Skip washing and paint may not adhere evenly.
2. Disassemble and Organize: After dry-fitting, take the kit apart and group parts by color or assembly section. Use small containers or a parts organizer to keep track. Losing a small part like the hand grenade is common—keep them separate.
3. Prime the Parts: Apply a thin, even coat of primer (gray or white) to all parts that will be painted. Let it dry completely before the next step. A thick primer coat can hide panel lines—use light passes.
4. Paint the Main Colors: Spray or brush paint the main armor pieces in your chosen color scheme. For the MS-06FZ, a light green or gray works well, but you can customize freely. Multiple thin coats beat one thick coat—avoid drips.
5. Panel Line and Detail: Use a fine-tip panel liner or wash to accent the panel lines. Clean up any smudges with a cotton swab dipped in lighter fluid or enamel thinner. Work in small sections so the liner doesn't dry before cleanup.
6. Weathering and Decals: Add weathering with dry brushing or a wash, then apply decals. Seal everything with a matte or gloss topcoat to protect the finish. Topcoat after decals to prevent them from peeling off.

Key Features of This Kit

• HGUC 087 MS-06FZ Zaku II FZ: The MS-06FZ Zaku II Kai type is a 1/144 scale model kit with snap assembly and removable skirt armor. Snap assembly means you can dry-fit parts before painting, and the removable skirt armor makes it easier to paint the inner frame and waist details.