Start with what the Lfrith box actually contains
The HGWFM 01 Gundam Lfrith is a 1/144 scale plastic High Grade kit from Mobile Suit Gundam: The Witch from Mercury. Before you clip anything, tip the box and sort the contents. The supplied listing names the Gundam Lfrith, two beam sabers, a chest shell unit, a pre-printed blank receiver, a gun beam blade effect, a composite GUND-BIT shield with seven bit staves, and a shield adapter.
That parts list matters for a first build because it tells you where small pieces are likely to appear. The bit staves and shield adapter are the kind of small components that can get lost during cleanup, so keep a shallow tray or a small parts bag nearby. The kit is made of plastic and is part of the High Grade line, which is a useful starting point for beginners, but the supplied information does not confirm a specific age rating or skill level.
Kit facts that shape your build plan
- HGWFM 01 Gundam Lfrith: 1/144 scale plastic kit in the High Grade line, from Mobile Suit Gundam: The Witch from Mercury. Scale and line tell you this is a compact kit, so work at a comfortable table height and keep your cutting area clear.

HGWFM 01 Gundam Lfrith - HGWFM 01 Gundam Lfrith: Box contents include the Gundam Lfrith, 2x Beam Sabers, Chest Shell unit, Pre-printed Blank Receiver, Gun Beam Blade effect, Composite GUND-BIT Shield / 7 Bit Staves, and Shield adapter. Knowing the small parts up front helps you plan where to place them during assembly and cleanup.
A clean nub removal sequence for the Lfrith
Nub removal is the step that most affects how a first kit looks. Work through these steps in order, and don't rush the final trim.
- Cut parts from the runner with a small gap: Use side cutters and leave a thin bit of plastic attached to the part. This reduces stress marks on the surface.
- Trim the remaining nub in stages: Take off most of the stub with the cutters, then shave the last bit with a hobby knife. Keep the blade flat to the part surface and cut away from your fingers.
- Check the fit before forcing anything: Dry-fit joints and small parts like the shield adapter and bit staves. If a part resists, look for a leftover nub rather than pushing harder.
- Keep small parts contained: Place the bit staves and shield adapter in a tray as you clean them. They are the easiest pieces to lose on a first build.
Panel lining the Lfrith without overdoing it
Panel lining adds depth to the Lfrith's surface details, but the supplied information does not include specific panel line locations, paint colors, or manufacturer instructions for this kit. Treat any panel lining as your own choice rather than a required step. A conservative approach is to line only the most obvious recessed edges and seams, then step back and check the result under your normal room light.
If you are new to panel lining, test your technique on a spare piece of runner first. The kit's plastic is the same material, so it gives you a safe surface to see how your liner flows and dries. Avoid flooding recesses, and keep a clean cotton swab or cloth handy for cleanup according to the liner product you use. The supplied record does not confirm which lining products are compatible with this kit, so follow the product you buy rather than assuming a specific brand.
Beginner checkpoints before you move to display
Once the main body is together, use these checks to catch problems before you add the smaller equipment.
- Check joint movement: Move the arms and legs gently through their range. If something feels tight, inspect for a nub or a part that is not fully seated.
- Test the shield and bit staves: The composite GUND-BIT shield and seven bit staves are separate components. Dry-fit the shield adapter and confirm the shield sits the way you want before final placement.
- Keep the pre-printed blank receiver protected: The chest shell unit and pre-printed blank receiver are supplied parts. Handle them with clean hands and avoid unnecessary handling during cleanup.
- Decide on the beam effect last: The gun beam blade effect and two beam sabers are optional display pieces. Attach them after the main kit is clean and stable.
What the supplied information does not confirm
The listing does not include an age range, a difficulty rating, or step-by-step assembly instructions for the HGWFM 01 Gundam Lfrith. It also does not confirm which paints, topcoats, or decals are compatible with the kit. That is not a reason to avoid the kit; it simply means you should rely on the printed manual inside the box for assembly order and on the labels of any paint or liner you choose.
For a first build, the safest plan is to assemble the kit out of the box, practice nub removal, and only add panel lining or paint after you have a feel for the plastic. The Lfrith's parts list gives you plenty to work with, and a clean build with well-trimmed nubs will look sharp without any extra finishing.

