Using Mr. Color Spray S63 Gloss Pink for Custom Kits
By Newtype: Gundam Model Kits / Gunpla / Paint / Tools | Published: 2026-10-27
Category: How-to Guides
Learn how to apply Mr. Color Spray S63 Gloss Pink for a durable, glossy finish on custom Gundam kits. Step-by-step guide with common mistakes to avoid.
Quick Answer
Mr. Color Spray S63 Gloss Pink delivers a durable, high-gloss finish ideal for custom Gunpla parts. Follow proper surface prep and spraying technique to avoid orange peel and uneven coverage.
Why Choose Mr. Color Spray S63 Gloss Pink
This spray can is a convenient way to apply Mr. Color's trusted formulation without an airbrush. The fine spray nozzle produces a strong, even film that cures to a glossy finish. It works well on primed plastic, resin, or metal parts.
The gloss pink color is especially useful for accent panels, weapon details, or full recolor projects. Because it's a spray can, you get consistent results across large surfaces without brush strokes.
Limitations to Consider
Spray cans offer less control than an airbrush for fine gradients or small details. The gloss finish will show surface imperfections more than flat paints, so thorough sanding and priming are essential.
Temperature and humidity affect drying time. Avoid spraying below 50°F or above 85°F to prevent blushing or slow curing.
Step-by-Step Painting Process
- Prepare the Surface: Sand the part with 800-1000 grit sandpaper, wash with mild soap and water, and let dry completely. Apply a primer (gray or white works well under pink) and let it cure for at least 24 hours. Skipping primer can cause the gloss pink to peel or look uneven.
- Shake the Can Thoroughly: Shake Mr. Color Spray S63 for at least 2 minutes after you hear the mixing ball rattle. Warm the can in a bowl of warm water (not hot) for 5 minutes if the room is cool. Insufficient shaking leads to sputtering and a grainy finish.
- Test Spray on Scrap: Spray a quick burst onto a piece of scrap plastic or cardboard to check the spray pattern and color opacity. Adjust distance if the pattern is too wet or too dry. Always test before your first pass on the actual part.
- Apply Light, Even Coats: Hold the can 6-8 inches from the surface. Spray in steady left-to-right passes, overlapping each pass by about 50%. Apply 2-3 thin coats, waiting 10-15 minutes between coats. Heavy coats cause drips and orange peel. Thin coats build a smooth gloss.
- Let Cure Fully Before Handling: After the final coat, let the part cure for at least 48 hours in a dust-free area. The gloss will continue to harden and deepen over the next week. Handling too early leaves fingerprints and dulls the gloss.
Product Used in This Guide
- Mr. Color Spray S63 Gloss Pink 40ml: Mr. Color Spray S63 Gloss Pink 40ml is a spray version of Mr. Color, designed to deliver a high-quality and strong film through fine spraying. The fine spray nozzle helps you achieve a smooth, glossy coat even on curved Gunpla parts, reducing the risk of drips.
Mr. Color Spray S63 Gloss Pink 40ml
