Torna al blog
Guide pratiche 2026-11-21 Newtype: Gundam Model Kits / Gunpla / Paint / Tools 0 visualizzazioni

Odenkan OB-06 Fuchsia Paint: When to Use It on Gunpla

Odenkan OB-06 Fuchsia Paint: When to Use It on Gunpla

Learn when and how to use Odenkan OB-06 Fuchsia lacquer paint on your Gunpla models, including airbrush tips and color mixing advice.

Odenkan OB-06 Fuchsia Paint: Key Questions Answered

What is Odenkan OB-06 Fuchsia paint used for on Gunpla?
OB-06 Fuchsia is a vibrant lacquer paint from the Odenkan line, ideal for adding bold accent colors to Gundam models. Use it on armor panels, weapons, or inner frames to create custom color schemes that stand out.
Is OB-06 Fuchsia pre-thinned for airbrushing?
Yes. According to the product information, Odenkan lacquer paints are pre-thinned for 0.5mm airbrushes. For 0.3mm airbrushes, you need to add additional thinner to improve flow and consistency.
What air pressure should I use for OB-06 Fuchsia?
The recommended air pressure is 18 psi (1.2 bar). Apply 1-2 coats until you reach the desired saturation. Always shake the bottle well and work in a well-ventilated area.
Can I mix OB-06 Fuchsia with other Odenkan colors?
Yes. All Odenkan colors can be mixed with each other to create custom shades. For accurate and vibrant results, use the Primary Color (OP) Series for tuning.
How many coats of OB-06 Fuchsia should I apply?
The product instructions recommend applying 1-2 coats at 18 psi (1.2 bar) until the desired saturation is achieved.
What safety precautions should I take when using this paint?
Shake the bottle well before use and always spray in a well-ventilated area. Lacquer paints produce fumes, so proper ventilation or a spray booth is recommended.

Product Facts for Your Bench

  • Odenkan OB-06 Fuchsia 35ml: Odenkan Lacquer Paint 35ml container, made in Taiwan. Pre-thinned for 0.5mm airbrushes; for 0.3mm airbrushes add thinner. This tells you whether you need to thin the paint before spraying. If you use a 0.3mm airbrush, plan to add thinner for consistent flow.
    Odenkan OB-06 Fuchsia 35ml
    Odenkan OB-06 Fuchsia 35ml
  • Odenkan OB-06 Fuchsia 35ml: Apply 1-2 coats at 18 psi (1.2 bar) until desired saturation is achieved. These are the exact settings for a successful application. Using the right pressure and coat count prevents runs and ensures even coverage.
  • Odenkan OB-06 Fuchsia 35ml: All colors can be mixed with each other to create custom colors. For accurate results, use the Primary Color (OP) Series for tuning. OB-06 Fuchsia can be blended with other Odenkan paints to create unique shades, giving you full control over your Gunpla's color palette.

Articoli correlati

Customer Service
Home
Prodotti
Carrello
Profilo