How to Build Figure-Rise Standard Chuatury Panlunch

Quick Answer

Start by cutting parts from the runners with a sharp nipper, then dry-fit each section before pressing pieces together. For the Figure-Rise Standard Chuatury Panlunch kit, pay extra attention to the hair assembly and the optional squatting/sitting parts to get the best pose without stress marks.

Step-by-Step Assembly Guide

1. Cut and Clean Parts: Use a sharp nipper to cut each part from the runner, leaving a small nub. Then trim the nub with a hobby knife or file it down with a glass file until it's flush with the surface. Checkpoint: Run your finger over the cut area—if it feels smooth, it's ready. Cutting too close can gouge the plastic, so leave a bit and shave it down.
2. Assemble the Head and Face: Follow the manual to build the head, starting with the face plate. Insert the tampo-printed face first. For the decal faces, apply them before assembling the head to make handling easier. Checkpoint: Make sure the face sits flush. If you're using decals, let them dry completely before touching the head.
3. Build the Hair Assembly: The hair comes in multiple pieces. Dry-fit them first to see how they interlock, then press together firmly. Be careful with the side and back sections—they can be tight. Checkpoint: Check for any gaps between hair sections. If parts don't meet, gently sand the contact edges instead of forcing them.
4. Assemble the Torso and Uniform: Build the torso, which includes the uniform parts. Attach the collar and any small details. Ensure the shoulder joints are inserted correctly before closing the torso halves. Checkpoint: Move the shoulders gently after assembly—if they feel stiff, they may be misaligned. Adjust before moving on.
5. Build Arms and Legs: Assemble the arms and legs, including the hands and feet. For the squatting or sitting pose, use the alternate body parts provided instead of the standard legs. Checkpoint: Test the range of motion at each joint. If a joint is too loose, apply a thin coat of clear nail polish or hobby cement to tighten it.
6. Final Assembly and Pose: Connect the head, torso, arms, and legs. If you want the squatting or sitting pose, swap in the special parts now. Attach any accessories or weapons included in the kit. Checkpoint: Pose the figure and check balance. If it won't stand, adjust the feet or use a display stand if available.
7. Apply Decals (Optional): For the extra facial expressions, cut out a decal, soak it in water for a few seconds, then slide it onto the face plate. Use a cotton swab to press out air bubbles and excess water. Checkpoint: Let the decal dry for at least 30 minutes before handling. If it wrinkles, you can carefully reposition it with a damp brush.

About the Kit

• Figure-Rise Standard Chuatury Panlunch: Chu-chu from 'Mobile Suit Gundam: The Witch From Mercury' is now a member of Bandai's 'Figure-rise Standard' model kit series. She has one tampo-printed facial expression, plus two more created with waterslide decals. You get three expressions total, so you can swap faces to match different scenes or poses. The tampo-printed one is ready out of the box, while the decals let you customize without painting.
• Figure-Rise Standard Chuatury Panlunch: Her distinctive hairstyle is carefully made into a three-dimensional form. Her uniform is divided into parts, and special body parts are included to display her either squatting or sitting. The hair is a key visual feature—take your time assembling it to avoid gaps. The alternate body parts give you display flexibility beyond a standard standing pose, which is great for dioramas or shelf variety.